Nine product types
Sills, sill caps, wall panels, panel boards, slat panels and the corner, joint, skirting and end profiles, each with its own cross-section and joints.
See the sill before it is cut.
Configure PVC window sills, wall panels, panel boards, slat panels and finishing profiles in 3D, with the decors, widths and lengths of the real range. Compare decors on a photographic model, choose the size, and the configurator shows the cut, the end caps and, for claddings, the finished wall with the number of boards.
Launch full configurator ↗Every deployment is built on the same connected commercial and spatial foundation—even as the product category changes.
The approved visual state resolves into an exact component structure: profiles, panels, glass, hardware, accessories and quantities ready for downstream work.
Configure PVC window sills, wall panels, panel boards, slat panels and finishing profiles in 3D, with the decors, widths and lengths of the real range. Compare decors on a photographic model, choose the size, and the configurator shows the cut, the end caps and, for claddings, the finished wall with the number of boards.
Sills, sill caps, wall panels, panel boards, slat panels and the corner, joint, skirting and end profiles, each with its own cross-section and joints.
Golden oak, walnut, wenge, marble, anthracite and the other foils from the range, applied at real scale on the modelled profile.
Sill widths from 150 to 600 mm, boards of 125, 200 or 250 mm, bars of 3, 4 or 6 m and panel thicknesses of 20 or 24 mm.
Show a sill with end caps in the matching colour or with the cut end and its internal chambers visible.
Claddings are placed on a wall of chosen width and height, with the real board joints and the count of boards and bars needed.
Width, thickness and length are drawn on the model and can be hidden with one switch.
No. The configurator shows the list price published by the shop for the selected variant. Quantities for a wall are indicative; confirm them with your supplier.
Yes. The catalogue is a data file: product types, decors, sizes and prices come from a shop feed or price list, and the 3D profiles are built from cross-sections.
Nominal sizes come from the product data. Wall thicknesses, chambers and joint shapes follow the product photographs and are confirmed with the manufacturer's drawings when available.
The website preview shows selected controls. Open the full configurator to explore the supported workflow, or discuss adapting it to your catalogue. For a project review, bring available drawings or CAD, dimensions, option rules and the pricing or material outputs your team needs.
For PVC profiles, bring your range of sills, claddings and finishing profiles with widths, lengths, decors and the price list or shop feed the configurator should follow.
Implementation scope and pricing follow technical review. A website preview is not a manufacturing specification or a supplier quotation.
Send the drawings, catalogue or product examples you already have and explain the outcome you need. We identify missing assets and technical dependencies during the project review.
We review your price rules, required outputs and available interfaces. Integration scope is agreed after technical review, not assumed from a website demo.
We review the product, variants and available data, then clarify whether an existing system, an adaptation or a custom build fits. Scope, timing and pricing depend on that review.