Define the boundary. Resolve every bay.
A parametric fence configurator that coordinates perimeter layout, bay spacing, panel construction, finishes, access gates and foundation logic in one measurable 3D system.
Launch full configurator ↗Every deployment is built on the same connected commercial and spatial foundation—even as the product category changes.
The approved visual state resolves into an exact component structure: profiles, panels, glass, hardware, accessories and quantities ready for downstream work.
A parametric fence configurator that coordinates perimeter layout, bay spacing, panel construction, finishes, access gates and foundation logic in one measurable 3D system.
Build straight, L-shaped, U-shaped or closed perimeter arrangements from measurable runs and corner angles. Every change rebuilds the full fence path while preserving a coherent relationship between endpoints, corners and installation geometry.
Set a target bay width and let each run resolve into practical, equal panel divisions. Posts, clear openings and panel widths stay coordinated as the overall boundary changes, avoiding arbitrary stretched panels at the end of a run.
Compare vertical slats, horizontal slats, solid privacy panels and welded mesh within the same structural frame. Panel-specific spacing and infill geometry remain visible, so the choice communicates construction and privacy rather than color alone.
Apply powder-coated and wood-effect finishes across posts, rails, panels and gates as one system-level selection. The preview keeps finish intent attached to the configured geometry and the commercial material schedule.
Place pedestrian or driveway gates into valid bays, choose handing and coordinate the opening with adjacent posts. Concrete footings and base-plate installation options make the supporting condition part of the configured product.
Derive total fence length, panel area, bay count, post count, gates and installation components from the active perimeter. The resulting bill of materials and pricing state update from the same geometry shown to the customer.
The 360Configurator fence tool connects layout geometry, run lengths, bay spacing, panel construction, finishes, gates and foundations in one measurable 3D state. It explains how a selected system follows the actual boundary while keeping every panel and access opening commercially traceable.
Each decision rebuilds the same configured perimeter, keeping the customer view and the technical quantities synchronized.
Choose a straight, L-shaped, U-shaped or closed layout and set the measurable run lengths and corner angle.
Set the target bay width so each run becomes a practical sequence of equal panels and coordinated posts.
Compare vertical, horizontal, privacy and mesh infills, then apply the required powder-coated or wood-effect finish.
Position pedestrian or driveway gates and select concrete footings or base-plate installation.
Use the configured geometry to derive lengths, areas, posts, panels, gates and installation components.
Fence systems become difficult to quote when site geometry, panel modules and gates are handled separately. The configurator keeps the decisions connected.
Build the measurable boundary.
Resolve a manufacturable panel rhythm.
Specify appearance and support conditions.
Keep openings and quantities attached to geometry.
The spatial model makes corners, panel rhythm and gates visible while the same state produces the quantities needed downstream.
See the full perimeter, panel style, finish and gate placement before approving the system.
Keep run lengths, modules and commercial options aligned throughout the proposal.
Use bay, post, gate and foundation data as a structured starting point for delivery.
The current system supports straight, L-shaped, U-shaped and closed perimeter layouts, including four- and five-side closed geometry.
Yes. Active runs expose measurable length controls together with fence height, target bay width and the principal corner angle.
The current deployment includes vertical slats, horizontal slats, solid privacy panels and welded mesh.
Yes. Pedestrian and driveway gates can be placed in valid fence bays with their handing retained in the configuration.
Yes. Concrete-footing and base-plate installation conditions are represented in the geometry and material logic.
Yes. Lengths, panel area, posts, bays, gates and installation components feed the live BOM and price state.
No. The configurator runs in a modern browser using WebGL for the interactive 3D view.
Open the live configurator to test layouts, panel systems, finishes, gates and foundations, or contact us about adapting the system to your own fence range.
